Commercial Iced Tea We have Pluff Iced Tea in bulk packs for use in restaurants.  In an industry where everyone is serving the same commercial iced tea blend from the same suppliers, you can stand out by offering your guests the very best Southern Style iced tea.  It's so good, they'll come back just for the iced tea! Wholesale Iced Tea Your customers will love our premium Southern Style iced tea.  Retailers of gourmet foods, gift shops, and stores in southern tourism markets have found the value of offering a premium iced tea to their customers.  The packaging sells itself, but once they try it, the taste will have them coming back again and again. For pricing, or just learn more about what Pluff Iced Tea can do for your business, give us a call. Kyle Brown Founder - Oliver Pluff & Co. 843-540-4916 *** Iced Tea Catalog here ***

Commercial Iced Tea - Helpful Tips for a Quality Brew Line the tea basket with two filters.  This will slow the release of water, giving more time for steeping in the basket. Measure the tea.  Each tea variety will be measured differently based on weight/volume. Attach a Funnel Tip / Flow Restrictor to the Brew Basket to slow the release of water.  Check the temperature of the water.  Often, when a tea machine is first used at the beginning of the day, the tea machine has not had adequate time to reach 195 degree temperature that is needed for brewing.  Check the settings for the commercial tea brewer.  Often the settings may be changed to increase temperature, increase time of steeping to achieve a strong, full-flavored iced tea.  Commercial Iced Tea - Tea Association Brewing Tips   Selections from: "Recommendations for the Preparation of Iced Tea" from the Tea Association of the USA, Inc., In Cooperation With The National Restaurant Association. Published in 2000 "To Members of the Foodservice Industry: This information was created to provide continuity and consistency to foodservice training regarding the recommended preparation of iced tea. It should be followed as a guideline because: 1. Tea is the first or second largest percentage revenue producer for most restaurants and therefore deserves close and continuous attention. 2. Turnover rates cause a tremendous need for continuous training. 3. The manual will enable the operator to serve the highest quality tea and thus minimize the potential of negative publicity. The guidelines are provided as a service to the foodservice industry by the Tea Association of the USA. They are based on the most current scientific and technical information available. While there has never been a confirmed illness associated with the consumption of tea, in light of the myriad ways in which any food may become unsafe for consumption, the Tea Association cannot guarantee that merely following these sanitary recommendations will eliminate all risk of human illness. Furthermore, the sanitary guidelines contained herein should not be considered as a replacement for compliance with all other applicable sanitation standards and requirements. Continuous attention to all aspects of foodservice sanitation is critical to the health and safety of your patrons and the continued popularity of tea as a beverage. Tea Association of the United States, Inc. Start with a Good Beginning A. Water Filtration 1. Background • Brewed leaf iced tea is 99% + local water. Due to tea’s light flavor, the quality of input water is crucial to the end product served. • Clarity, color and taste are the most important iced tea characteristics. Clarity can be adversely affected by high mineral content in water. • Coffee equipment, as well as the new generation of automatic iced tea brewers, contain water solenoid valves, spray heads and heating elements which are susceptible to particulate clogging and scale/lime buildup especially in high mineral areas. 2. Water Problems Affecting Iced Tea Quality • Water Hardness – caused by high mineral content (i.e. calcium and magnesium). Tests show any hardness in excess of 200 ppm can cause clouding in iced tea. • Chemical taste and/or odor caused by chlorination of municipal water and the presence of hydrogen sulfide in the water. • Particulate Matter/Scale and Lime Accumulation – adversely affects the operational efficiency of automatic tea brewing equipment. 3. The Solution To minimize problems associated with a less than optimal water supply, the Tea Association recommends installation of appropriate filtration/conditioning equipment. a.) Desired Water Filter Characteristics • Mechanical particulate filtration at a minimum 20 micron level (40 microns can be seen unaided). • Activated carbon filter to remove soluble organic chemicals, taste and odor causing compounds and chlorine. • Lime/scale inhibitors to keep calcium and magnesium in suspension and separated from product bonding and reduce buildup on heaters and spray heads but do not inhibit clouding tendency. • Easy cartridge replacement • Minimum of 6 months cartridge life for average commercial use. Print installation date on filter for monitoring purposes • One all-purpose filter effective for all identified problems except water hardness. b.) Water Conditioning Equipment • Water softening equipment to reduce or eliminate water hardness caused by excessive mineral content. • Proper maintenance and cartridge replacement or recharging of this equipment according to manufacturer’s recommendation to ensure optimal performance. c.) Hard Water • In extreme hard water areas, use a preventive maintenance service arrangement. B. Tea Brewing Recommendations 1. Iced Tea a) Automatic Iced Tea Brewing Equipment (3-5 gallon brewing system) 1. Place tea bag into brewing basket. For loose tea, place new filter and tea into brewing basket. 2. Place a clean, sanitized urn with cover in position. 3. Following the manufacturer’s instructions, start brewing cycle. Brew water should be at least 195°F with a brew basket retention time of not less than one minute. For optimal quality, a total brew cycle of between 3-5 minutes is recommended. Brewing equipment must be checked periodically to assure that this temperature is being achieved. 4. When brewing is finished, stir contents of dispensing urn with a sanitized stirrer if brewing equipment is not equipped with an auto-blend feature and put cover in position. b). Automatic Coffee Machine Method/Pourover System (for each gallon of iced tea) 1. Place one 1oz. tea bag into filter basket.* 2. Slide filter basket under brewing head. 3. Place sanitized pot under brew basket and start brew cycle. Brew water should be at least 195°F with a brew basket retention time of not less than one minute. For optimal quality, a total brew cycle of between 3-5 minutes is recommended. Brewing equipment must be checked periodically to assure that this temperature is being achieved. Pour concentrate into a clean, sanitized urn, add fresh, cold tap water to equal one gallon. *NOTE: For the highest quality iced tea, use a dedicated brew basket and tea decanter for tea use only. c) Traditional Steeping Method (each one ounce bag makes one gallon of iced tea) 1. Place tea into a clean, sanitized container for each gallon of iced tea desired. 2. Preferably, pour one quart of boiling water for each tea bag used and steep for 3-5 minutes. Minimally, tea leaves should be exposed to water at a temperature of 195° F for approximately 5 minutes. 3. Carefully remove tea bag and add fresh, cold tap water to yield final quantity of iced tea. d) For commercial purposes, “sun” tea is not an acceptable practice for steeping tea. 2. Tea Tips 1. Store tea bags in a dark, cool and dry place away from strong odors and moisture. Do not refrigerate. 2. Never hold finished brewed tea for more than twelve hours at room temperature. Discard any unused tea after twelve hours. 3. Brew only enough tea that you reasonably expect to sell within a few hours. 4. To protect tea flavor and to avoid bacterial contamination and growth, clean and sanitize tea brewing, storage and dispensing equipment at least once a day. 5. For any method described, use a calibrated thermometer each week to make sure that brewing water in your equipment meets the recommended temperature. C. Sanitation Practices for Fresh-Brewed Iced Tea Equipment Brewed leaf tea is 99% local water. Its flavor is such that the quality of the water and condition of the brewing equipment is crucial to a quality fresh-brewed iced tea product. To guarantee your brewing equipment is clean and your customers receive only the best fresh-brewed iced tea, follow these simple steps: 1. Brew only enough tea that you reasonably expect to sell within 12 hours. Discard any unused tea after 12 hours. 2. For automatic iced tea and automatic coffee machine equipment, tea should be brewed using water which is at least 195°F. Tea leaves should remain in contact with the water for a minimum of 1 minute. For optimal quality, a total brew cycle of between 3-5 minutes is recommended. 3. To protect tea flavor and to avoid bacterial contamination and growth, CLEAN and SANITIZE tea brewing and storage equipment at least ONCE A DAY as follows: a.) Dismantle dispensing spigots, hoses, storage reservoirs (removing gaskets, “O” rings, etc) and rinse in warm water along with other brewing and storage utensils (e.g., pitchers, spoons, etc.) b.) Wash using a good dish detergent, in hot water. Be sure to remove any encrusted soil deposits with a brush or cleaning pad, if needed. c.) Rinse thoroughly with clean hot water. d.) Sanitize by immersing non-stainless steel parts for at least 1 minute in hot water at 180°F OR by rinsing in a solution of warm water mixed with chlorine (minimum 50 ppm- one capful of chlorine bleach to one gallon of water). Do NOT use chlorine bleach on stainless steel urns or dispensers as it will promote small leaks (See Manufacturers’ Dispenser Cleaning Section). e.) Disassemble dispenser spigot and clean and sanitize according to manufacturers directions (for example, see Sanitation of Spigots by company as described in Equipment Section) f.) Replace any worn gaskets, “O” rings, or any other badly scratched or damaged parts before reassembling. (See diagram in Equipment Section for each company’s equipment)"